Applied Operations; Set Radar Signal Processing (Process Setting) - JRC JMA-9123-7XA Instruction Manual

3.8

APPLIED OPERATIONS

3.8.1

Set Radar Signal Processing (Process Setting)

This function enables the setting of detail information about radar signal
processing.
Procedures
1) Open the Process Setting menu by performing the menu
operation below.
The Process Setting menu will appear.
Detail information about radar signal processing can be set by changing the settings of the
menu items.
3.8.1.1 Video Latitude
• Select the dynamic range in which receiving signals are to be shown on the
radar display.
• Select
Normal
•
Narrow
mode.
JMA-9100 Instruction Manual
Main
→ 3. RADAR Menu
→
1. Process Setting
After the settings for radar signal processing are
NOTE:
changed, small targets may not be displayed or
unwanted waves may not be suppressed. Thus, do not
make a significant change in the settings.
in standard, and
clearly displays short-range videos when STC is used in manual
Narrow : Narrows the dynamic range at short range.
Normal
: Standard setting
The dynamic range varies depending on the actual range:
Short distance: wide Long distance: narrow
Wide
: Use this mode when rainy weather intensifies unwanted
waves.The dynamic range is about twice as wide as when
Normal
Super Wide
: Use this mode when rain cloud remain at
3－ 91
> >
3.BASIC OPERATION 3.8 APPLIED OPERATIONS
in rainy weather.
Wide
is selected.
3
Wide mode.