Mounting The Realpresence Collaboration Server (Rmx) 1500 On A Shelf; Connecting The Realpresence Collaboration Server (Rmx) 1500 To A Power Source - Polycom RMX 1500 Hardware Manual

7

Mounting the RealPresence Collaboration Server (RMX) 1500 on a Shelf

Connecting the RealPresence Collaboration Server (RMX) 1500 to a Power
Source
The following restrictions apply to the conductors and connectors that may be used to
ground the unit when rack mounted:
•
•
•
Polycom, Inc.
Repeat step 5 for the right rack rail runner
Figure 1-5 RMX 1500 Bolt Installation
The installation is complete.
— Install the shelf supplied by the rack manufacturer, in the rack.
— Mount the RMX on the shelf.
— Fasten the RMX to the rack with screws through the four holes in the RMX's front
mounting brackets.
When using bare conductors, they must be coated with an appropriate antioxidant
compound before crimp connections are made. Tinned, solder-plated or silver-plated
connectors do not have to be prepared in this manner.
The same bolt assemblies should not secure multiple connectors.
Listed fastening hardware must be compatible with the materials being joined and
must be preclude loosening, deterioration and electrochemical corrosion of the
hardware and joint materials.
Chapter 1-Hardware Description
1-11