Measurement Example Signal Settings; Measurement Procedure; Viewing I/Q Waveform Measurement Results - Keysight X Series Manual

Making WLAN Measurements
Making I/Q Waveform Measurements

Measurement Example Signal Settings

Measurement Procedure

Step
1. Select WLAN Mode.
2. Preset the analyzer.
3. Select the desired radio standard.
4. If necessary, select the frequency
settings.
5. Select the measurement.
6. Examine the keys that are available
to change measurement
parameters from their default
conditions.
7. Select the waveform measurement
again or restart the measurement.

Viewing I/Q Waveform Measurement Results

Measurement results available include a graphical display of power versus time
of the RF signal and a text window showing the mean and peak-to-mean
power results.
For more information on what these data are, see the N9077A & W9077A
WLAN Measurement Application User's and Programmer's Reference.
Click to Go Back to
Keysight WLAN Measurement Guide
Frequency: 2412 MHz
Output Power: -30 dBm (at analyzer input)
WLAN signal radio standard: 802.11n/40 MHz
Data Rate: 270 Mbps 64 QAM
Action
a. Press
a. Press
factory preset.
b. To recall a user-defined Preset: Press
User Preset
current mode.
a. Press
802.11n
a. Press
a. Press
a. Press
parameters you want to change and input
your settings.
a. Press
Restart
"Making I/Q Waveform Measurements" on page
MODE WLAN
, .
Mode Preset
button for the
User Preset
, to preset the
MODE Setup Rad io Std
,
802.11n (40 MHz)
,
FREQ Channel 2412 MHz
, ,
MEAS IQ Waveform
, .
Meas Setup,
then select the
Meas, IQ Waveform
, or press
.
Notes
,
.
.
82.
83