What Does The Keysight N9077A & W9077A Wlan Measurement Application Do - Keysight X Series Manual

About WLAN Measurement Application
What Does the Keysight N9077A & W9077A WLAN Measurement Application Do?
What Does the Keysight N9077A & W9077A WLAN Measurement
Application Do?
The Keysight N9077A & W9077A WLAN measurement application can be used
to quickly ensure a product development conforms to regulatory requirements,
as well as providing RF diagnostic and troubleshooting capability for a WLAN
device.
The WLAN measurement application supports the following standards:
— IEEE Std 802.11
— IEEE P802.11ac/D7.0, Dec 2013
— IEEE Standard 802.11ah/Draft 3.0, Dec 2014
For 802.11n, the WLAN measurement application fully supports Legacy mode,
HT-Mixed mode and HT-Greenfield mode.
Besides the standards above, Turbo mode (40 MHz), 802.11j (10 MHz / 20
MHz) and 802.11p (5 MHz / 10 MHz / 20 MHz) are also supported based on
the preset of the related standards.
You can select the standard by pressing Mode Setup, Rad io Standard.
The Option N9077A & W9077A WLAN measurement application provides the
following one-button measurements:
— Channel Power Measurement
— Occupied Bandwidth (OBW) Measurement
— Power Stat CCDF Measurement
— Spectrum Emission Mask Measurement
— Spurious Emissions Measurement
— Power vs Time Measurement
— Spectral Flatness Measurement
— Modulation Analysis Measurement
— Monitor Spectrum Measurement
— I/Q Waveform Measurement
When you select the standard format for use, the instrument automatically
makes measurements using the measurement methods and limits defined in
the standards. Detailed measurement results are displayed allowing you to
make further analysis.
Measurement parameters may be altered for specialized analysis via the Meas
Setup menu.
10
TM - 2012
Keysight WLAN Measurement Guide