Making WLAN Measurements
Making Spurious Emissions Measurements
Viewing Spurious Emissions Measurement Results
Measurement results available include a spectrum window and a text window
showing the spurs that are within the current value of the Maker Peak
Excursion setting of the absolute limit.
The measurement result of the selected spur in Spur under Meas Setup is
shown in yellow.
The measurement result of the selected range in Range under Meas Setup,
Range Table is shown in yellow.
For more information on what these data are, see the N9077A & W9077A
WLAN Measurement Application User's and Programmer's Reference.
Click to Go Back to
Example of One-Button-Measurement - Spurious Emissions
This example assumes the signal is correctly applied to the input.
Step 1. Press Mode Preset
Step 2. Press Meas, Spurious Emissions
Step 3. View the measurement default view. (See
Figure 2-16
Spurious Emissions (Default View)
If you have a problem, and get an error message, see Instrument Messages.
Keysight WLAN Measurement Guide
"Making Spurious Emissions Measurements" on page
Figure
2-16).
43.
45