Example Of One-Button-Measurement - Occupied Bw - Keysight X Series Manual

Making WLAN Measurements
Making Occupied Bandwidth Measurements
For more information on what these data are, see the N9077A & W9077A
WLAN Measurement Application User's and Programmer's Reference.
Click to Go Back to
page

Example of One-Button-Measurement - Occupied BW

This example assumes the signal is correctly applied to the input.
Step 1. Press Mode Preset
Step 2. Press Meas, Occupied BW
Step 3. View the measurement default view. (See
Figure 2-5 Occupied BW (Default View)
If you have a problem, and get an error message, see Instrument Messages.
26
"Making Occupied Bandwidth Measurements" on
24.
Figure 2-5).
Keysight WLAN Measurement Guide