Measurement Example Signal Settings; Measurement Procedure - Keysight X Series Manual

Making WLAN Measurements
Making Power Stat CCDF Measurements

Measurement Example Signal Settings

Measurement Procedure

Step
1. Select WLAN Mode.
2. Preset the analyzer.
3. Select the desired radio
standard.
4. If necessary, select the
frequency settings.
5. Select the measurement.
6. Optimize the attenuation
level and attenuation
settings suitable for the
measurement.
7. Store your current
measurement trace for future
reference.
8. Display the stored trace.
9. Examine the keys that are
available to change
measurement parameters
from their default conditions.
10. Select the desired radio
standard.
Keysight WLAN Measurement Guide
Frequency: 2412 MHz
Output Power: -30 dBm (at analyzer input)
WLAN signal radio standard: 802.11n/40 MHz
Data Rate: 270 Mbps 64 QAM
Action
MODE
a. Press
Mode Preset
a. Press
factory preset.
b. To recall a user-defined Preset: Press
User Preset
current mode.
MODE Setup
a. Press
802.11n 802.11n (40 MHz)
,
FREQ Channel
a. Press
MEAS
a. Press
AMPTD
a. Press
Atten for Min Clip
Trace/Detector
a. Press
Trace/Detector
a. Press
Meas Setup,
a. Press
parameters you want to change and input
your settings.
BW, Info BW,
b. Press
settings.
SPAN X Scale
c. Press
parameter you want to change then input
your settings.
MODE Setup
a. Press
802.11n 802.11n (40 MHz)
,
WLAN
, .
button for the
User Preset
, to preset the
Rad io Std
, ,
.
2412 MHz
, , .
Power Stat CCDF
, .
Attenuation Ad just
, ,
.
Store Ref Trace
,
Ref Trace (On)
,
then select the
then input your
and select the
Rad io Std
, ,
.
Notes
.
.
29