Rd4 Controller: Ethernet Network Settings; Showing The Network Settings; Showing The Chamber's Mac Address; Showing The Ip Address - Binder VDL Series Operating Manual

20.2 RD4 controller: Ethernet network settings

The settings in the Ethernet
to connect them with BINDER's APT-COM™ 4 Multi Management Software (option, chap. 25.1).

20.2.1 Showing the network settings

Required access level: "User".
The "Ethernet" submenu offers to subsequently or individually access the following information:
• MAC address
• IP address
• Subnet mask
• Standard gateway
• DNS server address
• DNS chamber name

20.2.1.1 Showing the chamber's MAC address

Path: Normal display
MAC address
With the arrow-down button you can now change to the next parameter (IP address).
With the Back button you can go back to the "Ethernet" submenu and, repeatedly pressing it, to
display.

20.2.1.2 Showing the IP address

Path: Normal display
IP address
With the arrow-down button you can now change to the next parameter (subnet mask).
With the Back button you can go back to the "Ethernet" submenu and, repeatedly pressing it, to
display.
VDL (E3) 09/2019
submenu are used for networking chambers with an Ethernet interface , e.g.
Chamber info
00:00:00:00:00:00
Chamber info
0.0.0.0
Ethernet MAC address
Display of the MAC address (exa-
mple)
Toggle forth and back with the Back
button and the OK button.
Ethernet IP address
Display of the IP address (example)
Toggle forth and back with the Back
button and the OK button.
Normal
Normal
Page 182/234