Setting The Current Time; Function "Language Selection At Restart - Binder VDL Series Operating Manual

13.2.4 Setting the current time

Required access level: "Admin". Following start-up of the chamber (chap. 9.6.1), it is "User".
Path: Normal display
Press the OK button to enable the setting.
Time
Time
With the Back button you can go back to the "Chamber" submenu and, repeatedly pressing it, to
mal display.

13.2.5 Function "Language selection at restart"

If the function "Language selection at restart" is activated, menu language, date, time, and temperature
unit are checked with every startup of the chamber. At this occasion it is also possible to modify them with
"User" access level.
Required access level: "Admin".
Path: Normal display
Press the OK button to enable the setting.
Language sel. at rest
With the arrow-down button you can now change to the next parameter (chamber address).
With the Back button you can go back to the "Chamber" submenu and, repeatedly pressing it, to
mal display.
VDL (E3) 09/2019
Settings Chamber
Setting the time: hours
The current setting flashes. Enter the current hour with the arrow but-
tons.
Confirm the entry with the OK button.
Setting the time: minutes
The current setting flashes. Enter the current minutes with the arrow
buttons.
Confirm the entry with the OK button.
Settings Chamber
Function "Language selection at restart"
The current setting flashes. Use the arrow buttons to select between
ON and OFF.
Confirm the setting with the OK button.
Time
Language selection at restart
Nor-
Nor-
Page 137/234