Performance After The End Of The Program - Binder VDL Series Operating Manual

18.3 Performance after the end of the program

As long as the message has not been confirmed, the setpoint of the last program section remains effecti-
ve. Program the last section as desired. If e.g. temperature and pressure control shall turn off, activate
the corresponding controller functions (chap. 11.4.1, 11.5.1).
After confirming the message the controller changes to Fixed value operation mode. Temperature and
humidity will then equilibrate to the setpoints of Fixed value operation mode.
VDL (E3) 09/2019
After the end of the program the message
"Device changes to fixed value operation
mode" appears on the screen.
Press the Confirm icon.
Page 157/234