Functional Overview And Menu Structure Of The Controller; Mb2 Controller; Figure 22: Normal Display Of The Mb2 Program Controller (Sample Values) - Binder VDL Series Operating Manual

8.

Functional overview and menu structure of the controller

The available controller functions depend on the current authorization (chap.12). Unless noted otherwise,
the figure in this manual show the functional range, which is available for the user with "Admin" authoriza-
tion level
8.1

MB2 controller

The MB2 chamber controller controls following parameters inside the chamber:
• Temperature in °C or °F
• Pressure in mbar
You can enter the desired set point values in fixed value operation mode directly on the display surface or
via the setpoint menu. For program operation the controller offers programming week and time programs.
In addition there is a timer program available (stopwatch function).
The controller offers various notifications and alarm messages with visual and audible indication and re-
mote alarms via e-mail, an event list (trace file) and the graphical display of the measuring values in the
in der chart recorder view. The MB2 program controller permits programming temperature and pressure
cycles, and specifying special controller functions for each program section. You can enter values or pro-
grams directly at the controller or use the APT-COM™ 4 Multi Management Software (option) specially
developed by BINDER.

Figure 22: Normal display of the MB2 program controller (sample values)

VDL (E3) 09/2019
Operating mode
Temperature values
Pressure values
Actual values
Set-point values
Functional icons
Page 78/234