11.3 Close all valves
Close all existing fine dosing valves
11.3.1 MB2 controller
Press the Setpoint setting icon to access the "Setpoint" setting menu from Normal display..
Setpoint > Fixed value operation setpoints > Functions on/off
Path:
When the function "Close all valves" is activated, the "All valves closed" icon is displayed in
the screen header in Normal display. Press the flash icon next to the information icon to dis-
play the corresponding text information"All valves are closed" (information messages, chap.
16.1.1)
11.3.2 RD4 controller
Path:
Normal display
Press the OK button to access the function "Close all valves".
Close all valves
Press the OK button to enable the setting.
Close all valves
With the Back button you can go back to the
Normal
display.
With setting "1" (all valves closed), the icon
VDL (E3) 09/2019
"Functions on/off" menu.
Mark the checkbox of the function "Close all valves" to
activate it and press the Confirm icon.
In the "Setpoints" menu press again the Confirm icon.
The controller changes to Normal display.
Setpoints
Functions on/off
Function 3 "Close all valves".
The current switching state is shown (example).
Setting the function 3 "Close all valves".
The current setting flashes. Use the arrow buttons to select between
"0" (valves in use) and "1" (valves closed).
Confirm the setting with the OK button.
"Functions
is shown in Normal display.
Close all valves
on/off" submenu and, repeatedly pressing it, to
Page 110/234