Mb2 Controller Operating Modes; Mb2 Controller Menu Structure - Binder VDL Series Operating Manual

8.1.4 MB2 controller operating modes

The MB2 program controller operates in the following operating modes:
• Fixed value operating mode
The controller operates as a fixed-point controller, i.e., set-points for temperature and pressure can be
defined, which are then maintained until the next manual change (chap. 10.1.1).
• Timer program operation
Stopwatch function: during an entered duration the controller constantly equilibrates to the setpoints
entered in Fixed value operation mode.
• Time program operation
An entered time program for temperature and pressure is running. The controller offers 25 program
memory places with 100 program sections each. The total number of program sections of all programs
is unlimited
• Week program operation
An entered week program for temperature and pressure is running. The controller offers 5 program
memory places with 100 switching points each. The switching points can be distributed over all days
of the week.
8.1.5

MB2 controller menu structure

Main menu: program settings, further information, "Service" submenu.
The "Settings" submenu allows general configuration of the controller.
List of active alarms
Access to the event list
Setpoint entry for Fixed value operation, Standby mode, turning on/off
temperature and/or pressure control, safety controller settings
Start/ pause/ cancel an already entered, respectively a running time
program or start / cancel an already entered, respectively a running
week program
Unless noted otherwise, the figures show the functional range, which is available for the user with "Ad-
min" authorization level.
VDL (E3) 09/2019
Use the navigation icons in the screen footer in
Normal display to access the desired controller func-
tions.
The available functions depend on the current autho-
rization level "Service", "Admin" or "User" (chap.
12.1.1. This is selected either during login or can be
available without password protection.
chap.
8.1.5.1
chap. 16.2
chap.
13.1.5
chap.
10.1.1,
11.5.1,
14.2.2.1
chap. 18.1,
18.2, 19.1
Page 83/234