Rd4 Controller; Password Request; Assign And Modify A Password - Binder VDL Series Operating Manual

12.2 RD4 controller

12.2.1 Password request

To access menus for which access is restricted, you must enter the corresponding password.
After calling the appropriate menu function with the OK button the password request appears.
Password
Password
Upon entering an incorrect password, the message "Wrong password" is displayed.
Wrong password
Following correct password entry you can access the desired menu function.

12.2.2 Assign and modify a password

In this menu you can assign and modify the passwords of the "User" and "Admin" access levels.
Required access level: "Admin".
Keep the password well in mind. There is no access to the corresponding menu functions
without the correct password.
VDL (E3) 09/2019
Password request.
The left two digits are flashing. Enter the desired numbers with the
arrow buttons.
Confirm the setting with the OK button.
Password request.
The right two digits are flashing. Enter the desired numbers with the
arrow buttons.
Confirm the setting with the OK button.
Display "Wrong password".
After 3 seconds the controller changes again to the password entry.
Enter the correct password.
Page 127/234