Selecting The Type Of Assignment Of The Dns Server Address (Automatic / Manual); Assigning The Ip Address - Binder VDL Series Operating Manual

20.2.2.2 Selecting the type of assignment of the DNS server address (automatic / manual)

Access to this function is possible only if automatic IP address assignment has been selected (chap.
20.2.2.1)
Path: Normal display
Press the OK button to enable the setting.
DNS server
If manual assignment of the DNS server address has been selected, you can now change with the arrow-
down button to assign the DNS server address (chap. 20.2.2.6)
With the Back button you can go back to the "Ethernet" submenu and, repeatedly pressing it, to
display.

20.2.2.3 Assigning the IP address

Access to this function is possible only if manual IP address assignment has been selected (chap.
20.2.2.1)
Path: Normal display
Press the OK button to enable the setting.
The IP address entry is done in four steps, corresponding to the number sections: (1).(2).(3).(4)
Principle of entry:
• Use the OK button to select the desired section of the IP address 1/4, 2/4, 3/4, 4/4 in the upper dis-
play line
• Use the Arrow buttons to enter the value for the selected section of the IP address
IP address
IP address
VDL (E3) 09/2019
Settings Ethernet
Selection of the type of assignment of the DNS server address.
The current setting flashes. Use the arrow buttons to select between
AUTO (automatic) and MANU (manual).
Confirm the setting with the OK button.
Settings Ethernet
IP address assignment (sample values).
The first section of the IP address is shown. Enter the desired value
with the arrow buttons.
Use the OK button to confirm the entry and proceed to the second
section of the IP address.
IP address assignment (sample values).
The second section of the IP address is shown. Enter the desired value
with the arrow buttons.
Use the OK button to confirm the entry and proceed to the third sec-
tion of the IP address.
DNS server
IP address
Page 185/234
Normal