Rd4 Controller - Binder VDL Series Operating Manual

Information messages overview:
Condition
Deactivated temperature control
Deactivated pressure control
Pressure threshold of 100 mbar not
reached
Ventilation via regular connection
"GAS/AIR" (4)
Ventilation via optional connection
"GAS/AIR 2" (5).
Regular connection "GAS/AIR" (4)
deactivated.
All valves are closed
Chamber is heating up
Standby mode activated
Information messages are not shown in the event list.

16.1.2 RD4 controller

Information messages provide information about the settings made or the current controller condition.
In Normal display a text message indicates the condition. The "Information" icon is flashing slowly.
T / pressure (mbar)
If there are several information messages, they are displayed one after the other.
Information messages overview:
Condition
Standby mode activated
Temperature control deacti-
vated
Pressure control deactivated
Pressure threshold of 100
mbar not reached
VDL (E3) 09/2019
Information
icon
Pressure control off
Information message
"Standby"
"Temperature control off"
"Pressure control off"
„Press.thresh. not reach"
Text information
Temperature setpoint
value display shows
" – – – – "
Pressure setpoint value
display shows
" – – – – "
"Pressure threshold not
reached"
"GAS/AIR"
"GAS/AIR 2"
"All valves are closed"
"Heating active"
"Standby"
Information message (example:
Pressure control deactivated)
Moment of information message
During Standby mode
Following deactivation of temperature
control
Following deactivation of pressure control
Until reaching 100 mbar or below
Start after
condition occurred
immediately
immediately
immediately
immediately
immediately
immediately
immediately
immediately
Page 147/234