Table of Contents
Advertisement
Mechanical installation
3.3 Installation
3.3.1
Mechanical installation: checklist
Use the following checklist to guide you through the mechanical installation procedure for the
enclosed drive. Read the "Safety instructions" section at the start of these Operating
Instructions before you start working on the device.
Note
Checking the checklist
Check the first box in the column on the right if the action applies to your enclosed drive. In
the same way, check the boxes once you have finished the installation procedure to confirm
that the activities are complete.
Item
Action
1
Check the shipping and handling indicators prior to installation. Refer to "Mechanical
installation/Assembly/Preparatory steps/Shipping and handling indicators".
2
The environmental conditions must be permissible. See "Technical specifications,
General technical specifications".
The enclosed units must be firmly attached using the anchor points provided.
The flow of cooling air is thus unobstructed.
3
The minimum ceiling height (for unobstructed air outlet) specified in the Operating
Instructions must be observed. The cooling air supply must be not be obstructed
(see "Mechanical installation/preparation").
4
Components that are supplied separately for transport reasons (e.g., top hats) must
be fitted (see "Mechanical installation/Fitting top hats").
5
The clearance around an open door (escape route) specified in the applicable
accident prevention guidelines must be observed.
6
With option M13/M78:
Select the required metric screw fastenings or heavy-gauge threaded joints based
on the cable cross-section and drill the required holes in the mounting plates. When
the cable is fed in from above, ensure that enough room is available if the cable has
to be bent because of the cable feeder and cross-sections. The cable entry should
be fed in vertically to minimize transverse forces on the entries (see "Mechanical
installation / line connection from above (option M13), motor connection from above
(option M78)").
44
Yes
Operating Instructions, 12/2018, A5E36652151A
Completed
Enclosed Drives
Advertisement
Table of Contents
