Replacing Components; Replacing The Filter Mats - Siemens SINAMICS S150 NEMA Operating Instructions Manual

Converter cabinet units
Hide thumbs Also See for SINAMICS S150 NEMA:
Table of Contents

Advertisement

11.4

Replacing components

Improper transport and installation of devices and components
Serious injury or even death and substantial material damage can occur if the devices are
not transported or installed properly.
• Transport, mount, and remove the devices and components only if you are qualified to
• Take into account that the devices and components are in some cases heavy and top-
11.4.1

Replacing the filter mats

The filter mats must be checked at regular intervals. If the mats are too dirty to allow the air
supply to flow normally, they must be replaced.
Note
Replacing the filter mats
Filter mat replacement is only relevant for options M23, M43 and M54.
Not replacing contaminated filter mats can cause premature drive shutdown.
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
WARNING
do so.
heavy; take the necessary precautionary measures.
The weights of the individual power blocks are listed in the corresponding section.
Maintenance and servicing
11.4 Replacing components
743

Advertisement

Table of Contents
loading

Table of Contents