First Commissioning - Siemens SINAMICS S150 NEMA Operating Instructions Manual

Commissioning
5.5 Initial commissioning with the AOP30
5.5 Initial commissioning with the AOP30
5.5.1

First commissioning

Start screen
When the system is switched on for the first time, the Control Unit is initialized automatically.
The following screen is displayed:
Figure 5-42
When the system boots up, the parameter descriptions are loaded into the operating field
from the CompactFlash card.
Figure 5-43
248
Initial screen
Load the parameter descriptions while booting up the system
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives