AUTOMATICALLY PRINTED REPORTS
The following automatically generated reports can be switched on and off:
TCR—printed out after every 35 communications
Transmission Result report—printed out after every transmission
Memory File list—printed after a file is stored in memory.
Polling Reservation list—printed after a polling file is reserved (Poll Later).
Switching Reports On and Off
1
Press the Function key and 4, 8.
2
Press the Yes key.
3
You have two options:
Switch the TCR on or off: press the
Yes key and change the setting with
the * key. When it is correct, press
the Yes key.
Skip this report: press the No key
and go to step
4
You have two options:
Switch the Transmission Report on
or off: press the Yes key and change
the setting with the * key. When it is
correct,
press the Yes key.
Skip this report: press the No key
and go to step
52
AUTOMATICALLY PRINTED REPORTS
"
.
#
.
5($'<
$872 5(3257" <1
7&5 5(3257" <1
$872 6(721
<
7; 5(3257"
$872 6(72))
<
<1