Suzuki GRAND VITARA JB416 Service Manual page 179

13) Remove differential lock clutch sleeve (1) from rear
output shaft (2).
2
14) Remove front drive sprocket bush (1) from rear
output shaft (2).
15) Take out front drive sprocket (1), front output shaft
assembly (2), drive chain (3) and needle bearing (4)
from rear case (5) all at once.
1
4
16) Remove snap ring (1), and then remove rear output
shaft assembly (2) from rear case (3).
1
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-62
1
I5JB0A331022-01
1
2
I5JB0A331023-01
2
5
3
I5JB0A331024-01
2
3
I5JB0A331025-01
17) Remove rear oil seal (1) from rear case (2) using flat
end rod or the like, if necessary.
18) Remove needle bearing (1) from rear case (2) using
special tool, if necessary.
Special tool
(A): 09913–76010
19) Remove input gear plate bolts (1) from front case (2).
1
2
I5JB0A331026-01
(A)
1
2
I5JB0A331027-01
1
2
I5JB0A331028-02