Front Brakes; Front Disc Brake Pad Removal And Installation - Suzuki GRAND VITARA JB416 Service Manual

Front Brakes

Front Disc Brake Pad Removal and Installation

Removal
1) Hoist vehicle and remove front wheel.
2) Remove caliper pin bolts (2).
3
1
1. Caliper
3. Disc
3) Remove caliper (1) from caliper carrier.
NOTE
Hang removed caliper (1) with a wire hook (2)
or the like so as to prevent brake hose from
bending and twisting excessively or being
pulled. Don't operate brake pedal with pads
removed.
4) Remove pads (3).
Repair Instructions
Installation
1) Install pad spring (1) and pads (2).
S5JB0E4206003
2
I5JB0A420003-01
2) Install caliper and tighten caliper (slide) pin bolts (1)
I1SQ01420004-01
NOTE
Install brake pad with wear indicator (5) to
vehicle center side on right wheel brake.
3
1
2
6
5
3. Disc
4. Caliper carrier
to specified torque.
NOTE
Make sure that boots are fit into groove
securely.
Tightening torque
Caliper pin bolt (a): 36 N·m (3.6 kgf-m, 26.0 lb-ft)
Front Brakes: 4B-1
4
2
6
6
I5JB0A420004-01
6. Shim
1,(a)
I5JB0A420005-01