Mechanical installation
Fitting the guide rails
7.3
Straight guide rails
7.3.1
104
───
When fitting the straight guide rails, care must be taken to ensure
the correct alignment of the guide rails and the correct position of
the lock:
Alignment of the upper guide rails
The guide rail [1] may only protrude on one side of the module. The
side of the module with the name plate [2] is used for orientation.
Alignment of the lower guide rails
The guide rail [1] may only protrude on one side of the module. The
side of the module with the name plate [2] is used for orientation.
XTS
Version: 3.1