Wall Mounts; Wall Mount Options; Non-Lockable Wall Mount Components - Cisco 8800 Series Administration Manual

Wall Mounts

•
•
•
•

Wall Mount Options

The following wall mount options are available:
• Cisco IP Phone 8800 Series Wall Mount Kit: A nonlockable wall mount kit available for the Cisco IP
• Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM: The kit is installed on the Cisco IP Phone

Non-Lockable Wall Mount Components

This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit.
The following figure shows the components of the Cisco IP Phone 8800 Series Wall Mount Kit.
Wall Mount Options, on page 123
Non-Lockable Wall Mount Components, on page 123
Non-Lockable Wall Mount Components for Phone with Key Expansion Module, on page 130
Adjust the Handset Rest, on page 136
Phone 8800 Series. This wall kit applies to Cisco IP Phone 8811, 8841, 8851, and 8861. The PID is
CP-8800-WMK=.
8851, and 8861 with one attached Cisco IP Phone 8800 Key Expansion Module. The PID is
CP-8800-BEKEM-WMK=
C H A P T E R
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
8
123