Cisco 8800 Series Administration Manual page 360

TR-069
Parameter
Unit Enable
Unit Online
HW Version
SW Version
TR-069
TR-069
Parameter
Enable TR-069
ACS URL
ACS Username
ACS Password
ACS URL In Use
Connection Request URL
Connection Request Username
Connection Request Password
Periodic Inform Interval
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
344
Description
Indicates whether the key expansion module that is
added to the phone is enabled.
Indicates whether the key expansion module that is
added to the phone is active.
Displays the hardware version of the key expansion
module that is added to the phone..
Displays the software version of the key expansion
module that is added to the phone.
Description
Settings that enables or disables the TR-069 function.
Default: Disabled
URL of the ACS that uses the CPE WAN Management Protocol. This
parameter must be in the form of a valid HTTP or HTTPS URL. The
host portion of this URL is used by the CPE to validate the ACS
certificate when it uses SSL or TLS.
Username that authenticates the CPE to the ACS when ACS uses the
CPE WAN Management Protocol. This username is used only for
HTTP-based authentication of the CPE.
If the user name is not configured, admin is used as default.
Password to access to the ACS for a specific user. This password is used
only for HTTP-based authentication of the CPE.
If the password is not configured, admin is used as default.
URL of the ACS that is currently in use. This is a read-only field.
URL of the ACS that makes the connection request to the CPE.
Username that authenticates the ACS that makes the connection request
to the CPE.
Password used to authenticate the ACS that makes a connection request
to the CPE.
Duration in seconds of the interval between CPE attempts to connect to
the ACS when Periodic Inform Enable is set to yes.
Default value is 20 seconds.
Cisco IP Phone Troubleshooting