Cisco 8800 Series Administration Manual page 333

Cisco IP Phone Troubleshooting
Parameter
Search Item 3 Filter
Search Item 4
Search Item 4 Filter
Display Attrs
Description
Customized filter for the searched item. Can be blank if not
needed.
Default: Blank
Additional customized search item. Can be blank if not needed.
Default: Blank
Customized filter for the searched item. Can be blank if not
needed.
Default: Blank
Format of LDAP results displayed on phone, where:
• a—Attribute name
• cn—Common name
• sn—Surname (last name)
• telephoneNumber—Phone number
• n—Display name
For example, n=Phone causes "Phone:" to be displayed in front
of the phone number of an LDAP query result when the detail
soft button is pressed.
• t—type
When t=p, that is, t is of type phone number, the retrieved number
can be dialed. Only one number can be made dialable. If two
numbers are defined as dialable, only the first number is used.
For example, a=ipPhone, t=p; a=mobile, t=p;
This example results in only the IP Phone number being dialable
and the mobile number is ignored.
• p—phone number
When p is assigned to a type attribute, example t=p, the retrieved
number is dialable by the phone.
For example,
a=givenName,n=firstname;a=sn,n=lastname;a=cn,n=cn;a=telephoneNumber,n=tele,t=p
Default: Blank
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
LDAP
317