Cisco 8800 Series Administration Manual page 149

Hardware and Accessory Installation
Step 2
Attach the phone bracket to the IP phone and key expansion assembly.
a) Detach power cord, and any other attached cords from the base of the phone, except the handset cord (and
headset cord, if there is a headset).
b) Attach the phone bracket by inserting the tabs into the mounting tabs on the back of the phone. The phone
ports should be accessible through the holes in the bracket.
c) Secure the phone bracket to the IP phone with the self-tapping screws using a #1 Philips-head screwdriver.
d) Reattach the cords and seat them in the clips that are incorporated into the phone body.
Install Non-Lockable Wall Mount Kit for Phone with Key Expansion Module
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
133