Cisco 8800 Series Administration Manual page 316

Vertical Service Activation Codes
Parameter
Call Unpark Code
Group Call Pickup Code
Exec Assistant Call Initiate Code
Exec Call Filter Act Code
Exec Call Filter Deact Code
Exec Assistant Call Push Code
Exec Call Retrieve Code
Exec Call Bridge Code
Important
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
300
If you change any of the service activation codes used by executives or assistants, you must update
the corresponding settings in BroadWorks.
Cisco IP Phone Troubleshooting
Description
The star code used for picking up a call from the call
park.
Defaults to *39.
The star code used for picking up a group call.
Defaults to *37.
For executive assistants: Initiates a call on behalf of
an executive from the user's (assistant's) extension.
Default: #64
For executives who have assistants: Activates call
filtering. When call filtering is on, assistants receive
incoming calls for executives.
Default: #61
For executives who have assistants: Deactivates call
filtering.
Default: #62
For executive assistants: Transfers an ongoing call
from the user (assistant) to the executive.
Default: #63
For executives who have assistants: Transfers an
ongoing call from an assistant to the user (executive).
For executive assistants: Transfers an ongoing call
from the executive to the user (assistant).
Default: *11
For executives who have assistants: Joins the user
(executive) to an ongoing call with an assistant.
For executive assistants: Joins the user (assistant) to
an ongoing call with an executive.
Default: *15