Cisco 8800 Series Administration Manual page 358

General
Parameter
Use Line Keys For BLF List
Customizable PLK Options
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
342
Cisco IP Phone Troubleshooting
Description
Controls whether the phone uses its line keys to
monitor the BLF list, when monitoring of the BLF
list is active.
When set to No, the phone uses only the Key
Expansion Module keys to monitor the BLF list.
This setting only has significance when BLF List is
set to Show.
Default: No
Example XML configuration:
<Use_Line_Keys_For_BLF_List
ua="na">Yes</Use_Line_Keys_For_BLF_List>
Features that users are allowed to configure on line
keys.
To allow a feature, add the corresponding option as
shown below. Separate options with the semi-colon
(;).
• Speed dial:
sd
• Busy Lamp Field (BLF) key to monitor a user:
blf
• Call pickup from a monitored line:
This option is only effective when the
Note
option is added.
blf
Default:
sd;
Note Adding the option automatically allows
sd
users to configure speed dial to a monitored
line (speed dial with BLF) when the
option is added.
Example, to allow all features:
sd;blf;cp
Example XML configuration:
<Customizable_PLK_options
ua="na">sd;</Customizable_PLK_options>
cp
blf