Enable Feature Key Sync; Enable Call Forwarding Status Sync Via Xsi Service - Cisco 8800 Series Administration Manual

Enable Feature Key Sync

Enable Feature Key Sync
When you enable the Feature Key Synchronization (FKS), the settings of call forwarding and do not disturb
(DND) on the server are synchronized to the phone. The changes in DND and call forwarding settings made
on the phone will also be synchronized to the server.
When you enable the Feature Key Synchronization (FKS), the settings of call forwarding and do not disturb
(DND) on the server are synchronized to the phone. The changes in DND and call forwarding settings made
on the phone will also be synchronized to the server. If configured, executives can access the Settings >
Assistant menu on the phone. Similarly, assistants can access the Settings > Executive menu.
Note Feature Key Sync must be enabled for all the executive and assistant users.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext [n] (where [n] is the extension number).
Step 2 In the Call Feature Settings section, set the Feature Key Sync field to Yes.
Step 3
Click Submit All Changes.
Related Topics

Enable Call Forwarding Status Sync via XSI Service

When call forwarding sync is enabled, the settings related to call forwarding on the server are synchronized
to the phone. The changes in call forwarding settings made on the phone will also be synchronized to the
server.
Note
If XSI sync for call forwarding is enabled and the XSI host server or XSI account is not configured correctly,
the phone user can't forward calls on the phone.
Before you begin
• Access the phone administration web page. See
• Configure the XSI host server and the corresponding credentials on the Voice > Ext (n) tab.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
228
DND and Call Forwarding Status
Enable Call Forwarding Status Sync via XSI
Enable DND Status Sync via XSI
• When using Login Credentials for XSI server authentication, enter XSI Host Server, Login User
ID, and Login Password in the XSI Line Service section.
Access the Phone Web Page, on page
Sync, on page 227
Service, on page 228
Service, on page 229
Access the Phone Web Page, on page
Cisco IP Phone Administration
88.
88.