Install A Spare Wall Mount Kit; Attach The Wall Bracket To The Wall - Cisco IP Phone 7800 Series User Manual

Install a Spare Wall Mount Kit

Figure 11: Components of Spare Wall Mount Kit for Cisco IP Phone 8800 Video Series
Install a Spare Wall Mount Kit
Make sure that a working Ethernet connection is available nearby before you install your wall mount kit. If
the phone covers the connector, the connector must be flush or recessed to the wall.
Complete your installation in the following order:

• Attach the wall bracket to the wall

• Attach the phone bracket to the phone
• Attach the cables to the phone
• Attach the phone to the wall bracket
Attach the Wall Bracket to the Wall
Each wall mount kit is slightly different, so refer to the appropriate example when attaching the bracket to
the wall.
Before you begin
Obtain one of each of the following:
• #2 Phillips-head screwdriver
• Level
• Pencil
Procedure
Step 1 Hold the bracket against the wall, with the arrow pointing up.
Step 2
Use the level to ensure that the bracket is level.
Step 3 Use a pencil to mark the screw holes.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
86
Mount Your Phone to a Wall