Cisco 8800 Series Administration Manual page 199

Cisco IP Phone Administration
Feature
Plus Dialing
Power Negotiation over LLDP
Problem Reporting Tool
Programmable Feature Buttons
Redial
Remote Customization (RC)
Ringtone Setting
Reverse Name Lookup
RTCP Hold For SIP
Serviceability for SIP Endpoints
Shared Line
Show Calling ID and Calling Number
Description and More Information
Allows the user to dial E.164 numbers prefixed with a plus (+) sign.
To dial the + sign, the user needs to press and hold the star (*) key for at least 1 second.
This applies to dialing the first digit for an on-hook (including edit mode) or off-hook
call.
Allows the phone to negotiate power using Link Level Endpoint Discovery Protocol
(LLDP) and Cisco Discovery Protocol (CDP).
Submits phone logs or reports problems to an administrator.
You can assign features, such as New Call, Call Back, and Forward All to line buttons.
Allows users to call the most recently dialed phone number by pressing a button or the
Redial softkey.
Allows a service provider to customize the phone remotely. There is no need for either
the service provider to physically touch the phone or a user to configure the phone. The
service provider can work with a sales engineer at the time of ordering to set this up.
Identifies ring type used for a line when a phone has another active call.
Identifies the caller name using the incoming or outgoing call number. You must configure
either the LDAP Directory or the XML directory. You can enable or disable the reverse
name lookup using the phone administration web page.
Ensures that held calls are not dropped by the gateway. The gateway checks the status
of the RTCP port to determine if a call is active or not. By keeping the phone port open,
the gateway will not end held calls.
Enables administrators to quickly and easily gather debug information from phones.
This feature uses SSH to remotely access each IP phone. SSH must be enabled on each
phone for this feature to function.
Allows a user with multiple phones to share the same phone number or allows a user to
share a phone number with a coworker.
The phones can display both the calling ID and calling number for incoming calls. The
IP phone LCD display size limits the length of the calling ID and the calling number that
display.
The Show Calling ID and Calling Number feature applies to the incoming call alert only
and does not change the function of the Call Forward and Hunt Group features.
See "Caller ID" in this table.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Telephony Features for Cisco IP Phone
183