Cisco 8800 Series Administration Manual page 284

Optional Network Configuration
Parameter
Enable PC Port Mirror
Syslog Server
Syslog Identifier
Debug Level
Primary NTP Server
Secondary NTP Server
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
268
Cisco IP Phone Troubleshooting
Description
Adds the ability to port mirror on the PC port. When
enabled, you can see the packets on the phone. Select
Yes to enable PC port mirroring and select No to
disable it.
Specify the syslog server name and port. This feature
specifies the server for logging IP phone system
information and critical events. If both Debug Server
and Syslog Server are specified, Syslog messages are
also logged to the Debug Server.
Select the device identifier to include in syslog
messages that are uploaded to the syslog server. The
device identifier appears after the timestamp in each
message.
• None: No device identifier.
• $MA: The MAC address of the phone, expressed
as continuous lower case letters and digits.
Example:
c4b9cd811e29
• $MAU: The MAC address of the phone,
expressed as continuous upper case letters and
digits. Example:
C4B9CD811E29
• $MAC: The MAC address of the phone in the
standard colon-separated format. Example:
c4:b9:cd:81:1e:29
• $SN: The product serial number of the phone.
Default: None
Example XML configuration:
<Syslog_Identifier
ua="na">$MAC</Syslog_Identifier>
The debug level from 0 to 2. The higher the level, the
more debug information is generated. Zero (0) means
that no debug information is generated. To log SIP
messages, you must set the Debug Level to at least 2.
Default: 0
IP address or name of the primary NTP server used
to synchronize its time.
Default: Blank
IP address or name of the secondary NTP server used
to synchronize its time.
Default: Blank