Cisco 8800 Series Administration Manual page 322

Language
Parameter
Daylight Saving Time Rule (continued)
Daylight Saving Time Enable
Language
Parameter
Dictionary Server Script
Language Selection
Locale
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
306
Cisco IP Phone Troubleshooting
Description
The <weekday> value equals any value in the range
1-7 (Monday-Sunday). It can also equal 0. If the
<weekday> value is 0, this means that the date to start
or end daylight saving is exactly the date given. In
that case, the <day> value must not be negative. If the
<weekday> value is not 0 and the <day> value is
positive, then daylight saving starts or ends on the
<weekday> value on or after the date given. If the
<weekday> value is not 0 and the <day> value is
negative, then daylight saving starts or ends on the
<weekday> value on or before the date given. Where:
• HH stands for hours (0-23).
• mm stands for minutes (0-59).
• ss stands for seconds (0-59).
Default: 3/-1/7/2;end=10/-1/7/2;save=1.
Enables Daylight Saving Time.
Default: Yes
Description
Use this field to specify the language options for the
phone display, and the dictionary and font files
required for each language. See
and Fonts, on page 82.
Default: Blank
Use this field to specify the default language. The
value must match one of the languages supported by
the dictionary server. See Specify a Language for the
Phone Display, on page 84.
You can configure the language through the XML
Configuration file. For example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
The language name can have up to 512 characters.
Use this drop-down list box to see the supported
languages. See Supported Languages for the Phone
Display, on page 81.
Set Up Dictionaries