Enable And Disable Reverse Name Lookup; Call Features Configuration; Enable Call Transfer - Cisco 8800 Series Administration Manual

Cisco IP Phone Administration
1. Phone contacts
2. Call History
3. LDAP Directory
4. XML Directory
Note The phone searches the XML directory using this format: directory_url?n=incoming_call_number.
Example: For a multiplatform phone using a third-party service, the phone number (1234) search query has
this format, http://your-service.com/dir.xml?n=1234.

Enable and Disable Reverse Name Lookup

Before you begin
• Configure one of these directories before you can enable or disable the reverse name lookup:
• Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2 In the Supplementary Services area, set the Reverse Phone Lookup Serv to:
• Yes–Enable the reverse name lookup feature.
• No–Disable the reverse name lookup feature.
Step 3 Click Submit All Changes.
Step 4
Alternative method is to use the config.xml file to provision the reverse name lookup feature.
<Reverse_Phone_Lookup_Serv ua="na">Yes</Reverse_Phone_Lookup_Serv>

Call Features Configuration

Enable Call Transfer

Before you begin
Access the phone administration web page. See
• LDAP Corporate Directory
• XML Directory
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Enable and Disable Reverse Name Lookup
Access the Phone Web Page, on page
Access the Phone Web Page, on page
88.
88.
153