Cisco 8800 Series Administration Manual page 282

IPv6 Settings
IPv6 Settings
Parameter
Connection Type
Static IP
Prefix Length
Gateway
Primary DNS
Secondary DNS
Broadcast Echo
Auto Config
802.1X Authentication
Parameter
Enable 802.1X Authentication
Optional Network Configuration
Parameter
Host Name
Domain
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
266
Cisco IP Phone Troubleshooting
Description
Internet connection type that is configured for the
phone. Options are DHCP and Static IP.
Default: DHCP
IPv6 address of the phone.
Identifies number of bits of a global unicast IPv6
address that are part of`the network. For example, if
the IPv6 address is 2001:0DB8:0000:000b::/64, the
number 64 identifies that the first 64 bits are part of
the network.
IP address of the gateway.
Primary Domain Name Server (DNS) assigned to the
phone.
Secondary Domain Name Server (DNS) if assigned
to the phone.
Options are Disabled and Enabled.
Default: Disabled
When enabled, phone generates an IPv6 address by
default with the prefix length sent from the router.
Options are Disabled and Enabled.
Default: Enabled
Description
Enables/disables 802.1X
Default: No
Description
The hostname of the Cisco IP Phone.
The network domain of the Cisco IP Phone.
If you are using LDAP, see LDAP Configuration, on
page 235.