Cisco 8800 Series Administration Manual page 277

Cisco IP Phone Troubleshooting
Parameter
CDPNeighborIP
CDPNeighborPort
LLDPNeighborDeviceId
LLDPNeighborIP
LLDPNeighborPort
PortSpeed
Access Port Information
Parameter
RxtotalPkt
Rxunicast
Rxbroadcast
Rxmulticast
RxDropPkts
RxUndersizePkts
RxOversizePkts
RxJabbers
RxAlignErr
Description
IP address of the neighbor device discovered that CDP
discovered.
Neighbor device port to which the phone is connected
discovered by CDP.
Identifier of a device connected to this port discovered
by LLDP discovered.
IP address of the neighbor device that LLDP
discovered.
Neighbor device port to which the phone connects
that LLDP discovered.
Speed and duplex information.
Description
Total number of packets that the phone received.
Total number of unicast packets that the phone
received.
Total number of broadcast packets that the phone
received.
Total number of multicast packets that the phone
received.
Total number of packets dropped.
The total number of packets received that are less than
64 octets long, which excludes framing bits, but
includes FCS octets, and are otherwise well formed.
The total number of packets received that are longer
than 1518 octets, which excludes framing bits, but
includes FCS octets, and are otherwise well formed.
The total number of packets received that are longer
than 1518 octets, which excludes framing bits, but
incudes FCS octets, and do not end with an even
number of octets (alignment error), or had an FCS
error.
Total number of packets between 64 and 1522 bytes
in length that were received and that had a bad Frame
Check Sequence (FCS).
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Access Port Information
261