Cisco 8800 Series Administration Manual page 357

Cisco IP Phone Troubleshooting
Parameter
Server Type
KEM Type
BLF List URI
Description
Specifies the server type with which the phone is
connected.
Options available:
• BroadSoft
• SPA9000
• Asterisk
• RFC3265_4235
• Sylantro
Allows you to select which type of key expansion
module is associated with the phone. Options are:
• BEKEM
• CP-8800-Audio—only supported on the Cisco
IP Phone 8851 and 8861(audio phones)
• CP-8800-Video—only supported on the Cisco
IP Phone 8865(video phones)
Default: BEKEM
The Uniform Resource Identifier (URI) of the Busy
Lamp Field (BLF) list that you have set up for a user
of the phone, on the BroadSoft server.
This field is only applicable if the phone is registered
to a BroadSoft server. The BLF list is the list of users
whose lines the phone is allowed to monitor. See
Phone Configuration for Monitoring Other Phones,
on page 192
The BLF List URI must be specified in the format
<URI name>@<server>. The BLF List URI
specified must be the same as the value configured
for the List URI: sip parameter on the BroadSoft
server.
Default: Blank
Example XML configuration:
<BLF_List_URI
ua="na">MonitoredUsersList@sipurash22.com</BLF_List_URI>
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
for details.
General
341