Connect A Key Expansion Module To A Cisco Ip Phone - Cisco 8800 Series Administration Manual

Multiplatform phones
Hide thumbs Also See for 8800 Series:
Table of Contents

Advertisement

Connect a Key Expansion Module to a Cisco IP Phone

Note
• The fast-charging feature on the back USB does not work when more than one key expansion module
• The fast-charging feature on the back USB doesn't work when more than one key expansion module is
• Cisco IP Phone 8851 with 2 key expansion modules works on 802.3at PoE only with v08 or later hardware.
Table 19: Power-Supply Compatibility for Cisco IP Phone 8851/8861 Key Expansion Module and Cisco IP Phone 8865 Key Expansion Module
Configuration
8851 with 1 key expansion
module
8851with 2 key expansion
modules
8861 and 8865 with 1 key
expansion module
8861 and 8865 with 2 key
expansion modules
8861 and 8865 with 3 key
expansion modules
Note
• The fast-charging feature on the back USB does not work when more than one key expansion module
• The fast-charging feature on the back USB doesn't work when more than one key expansion module is
• Cisco IP Phone 8851 with 2 key expansion modules works on 802.3at PoE only with v08 or later hardware.
Connect a Key Expansion Module to a Cisco IP Phone
If you want to install more than one key expansion module, you repeat steps 7-9 to connect the other key
expansion modules together.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
110
is attached to a Cisco IP Phone 8861 using 802.3at PoE.
attached to a Cisco IP Phone 8861, unless Cisco Universal PoE (UPoE) is used.
You can find the phone version information on the lower back of the phone as part of the TAN and PID
label. Version information is also located on the individual phone packaging.
802.3af Power over Ethernet
(PoE)
Yes
No
No
No
No
is attached to a Cisco IP Phone 8861 and 8865 using 802.3at PoE.
attached to a Cisco IP Phone 8861 and 8865, unless Cisco Universal PoE (UPoE) is used.
You can find the phone version information on the lower back of the phone as part of the TAN and PID
label. Version information is also located on the individual phone packaging.
802.3at PoE
Yes
Yes
See the third note below
Yes
Yes
See the first note below
Yes
See the first note below
Hardware and Accessory Installation
Cisco IP Phone Power Cube 4
Yes
Yes
Yes
Yes
Yes

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

881188418845885188618865

Table of Contents