Cisco 8800 Series Administration Manual page 327

Cisco IP Phone Troubleshooting
Parameter
Silent Ring Duration
Extension Mobility
Parameter
EM Enable
EM User Domain
Session Timer(m)
Countdown Timer(s)
Preferred Password Input Mode
XSI Phone Service
Parameter
XSI Host Server
XSI Authentication Type
Description
Controls the duration of the silent ring.
For example, if the parameter is set to 20 seconds, the
phone plays the silent ring for 20 seconds then sends
480 response to INVITE message.
Description
Options to enable or to disable the extension mobility
support for the phone.
Default: No
Name of the domain for the phone or the
authentication server.
Default: Blank
Specifies the duration of the phone session.
Specifies the duration for which it waits before it logs
out.
Default: 10
Options to specify the password input method of
extension mobility PIN. Options are: Alpha-numeric
and Numeric.
Default: Alphanumeric
Description
Enter the name of the server; for example,
xsi.iop1.broadworks.net.
Note
Default: Blank
Determines the XSI authentication type. Select Login
Credentials to authenticate access with XSI id and
password. Select SIP Credentials to authenticate
access with the register user ID and password of the
SIP account registered on the phone.
Default: Login Credentials
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Extension Mobility
XSI Host Server uses http protocol by
default. To enable XSI over HTTPS, you
can specify in the server.
https://
311