Cisco 8800 Series Administration Manual page 18

New and Changed for Firmware Release 11.2(3)
Revisions
Added new fields and topics to support the feature of
DND and call forwarding status sync
Added a new topic replacing the existing Busy Lamp
Field Configuration on a Monitoring Phone.
Added a new task on how to phone users to configure
speed dial and monitor a coworker's line.
Added a new topic about including a device identifier
in uploaded syslog messages.
Added new fields and a new task on how to remotely
report phone problems.
Added the Syslog Identifier field.
Replaced the Profile Account Enable parameter with
the Profile Authentication Type field
Updated the description of the Profile Rule parameter.
Updated Report Rule and added new parameters:
Report to Server, periodic Upload to Server, and
Upload Delay on Local Change.
Updated the description for the Extension field.
Updated the description of the First Name Filter and
Last Name Filter fields.
Example XML parameter configuration is added for
the Line Enable parameter.
Added a new task on how to assign the new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
Added a new field in the General table to support the
new parameter" KEM Type" that is added to the
phone web page
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
2
New and Changed Information
New and Changed Sections
DND and Call Forwarding Status Sync, on page 227
Enable Feature Key Sync, on page 228
Enable Call Forwarding Status Sync via XSI Service,
on page 228
Enable DND Status Sync via XSI Service, on page
229
XSI Line Service, on page 330
Phone Configuration for Monitoring Other Phones,
on page 192
Enable Users to Configure Features on Line Keys, on
page 187
Include a Device Identifier in Uploaded Syslog
Messages, on page 241
Report a Phone Problem Remotely, on page 360
PRT Status, on page 255
Optional Network Configuration, on page 266
Configuration Profile, on page 282
Upload Configuration Options, on page 289
Line Key, on page 308
LDAP, on page 315
Voice > Ext (n) > General, on page 319
Allocate a Key Expansion Module Type, on page 119
Allocate a Key Expansion Module Type with the
Phone Menu, on page 119
General, on page 340