Cisco 8800 Series Administration Manual page 24

New and Changed Features for Firmware Release 11(0)
Revision
Added factory reset and pinging in phone
web page with a specific URL
Added information on a star code is added
to Conference hard key from the phone
web page
Logo can be added as boot display
Key expansion modue will be
auto-detected when plugged in
New and Changed Features for Firmware Release 11(0)
All new features have been added to
Revision
Added Configure PRT Upload URL
Added Problem Report tool enhancements
Added Problem Report tool uplaod
Added enabling dial assistance
Added extra line keys support
Updated basic calls enhancements
Updated web https enhancements
Added Call Forwarding support on Voice tab and
User tab
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
8
Updated Section
Factory Reset the Phone from Phone Web Page, on page 365
Identify Phone Issues with a URL in the Phone Web Page, on
page 365
Enable Conference Button with a Star Code, on page 191
Add a Logo as the Boot Display, on page 151
Auto Detection of Key Expansion Modules, on page 117
Telephony Features for Cisco IP Phone, on page
Updated Section
Configure PRT Upload, on page 211
• #unique_128
Configure PRT Upload, on page 211
Enable Dial Assistance, on page 191
Set up Extra Line Keys, on page 192
• NAT Settings, on page 320
• SIP Settings, on page 321
• Call Feature Settings, on page 324
• Proxy and Registration, on page 327
• Subscriber Information, on page 329
• Audio Configuration, on page 332
Enable Access to Phone Web Interface, on page 170
System Configuration, on page 263
Call Forward, on page 154
New and Changed Information
179.