N5292A Functional Verification Procedure; Initial Setup For The N5292A Test Set Functional Verification - Keysight Technologies N5290/1A PNA Series Service Manual

System Tests and Adjustments

N5292A Functional Verification Procedure

N5292A Functional Verification Procedure
STOP! This section assumes you have completed the N5290/1A Incoming
Electrical Inspection and have isolated the problem to the N5292A test set.
If you are not sure the system problem is in the N5292A and you have not
completed the N5290/1A Incoming Electrical Inspection, refer to
N5290/1A Millimeter Test System Preliminary Check" on page
STOP! Before you begin this section, on your PNA, download and install
the N5292A Test Set Functional Verification software (
to
Calibration (Pna Cal) and Loading the N5292A Test Set Functional
Verification Software (Launch Test)" on page
IMPORTANT! Before you begin any testing on a System or instrument,
always inspect the connectors on the instrument, the calibration kit,
cables and adapters.
IMPORTANT! For purchasing test set functional verification test fixtures,
please contact Keysight. Refer to
This procedure contains two main sections:
—
—

Initial Setup for the N5292A Test Set Functional Verification

The following procedure provides instructions for setting up equipment to
verify the N5292A test set. The N5292A test set must pass the operator's
check, before the N5290/1A millimeter test system can be checked in the next
section. For the N5290/1A system verify, refer to
Test System Operator's Check" on page
The following procedures use the N5292A Test Set Utility (
part of the functional verification process. Refer to
http://na.support.keysight.com/pna/files/N5292A_TESTS.exe
Calibration (Pna Cal) and Loading the N5292A Test Set Functional
Verification Software (Launch Test)" on page
The instructions in this section and in generally assume a 4-Port N5292A. If
you are using a 2-Port N5292A, omit Ports 3 and 4.
— Millimeter head heater DAC values and power supply
— Millimeter head recognition
3-16
http://na.support.keysight.com/pna/files/N5292A_TESTS.exe
"Initial Setup for the N5292A Test Set Functional Verification" on
page 3-16
"Performing the N5292A Test Set Functional Verification" on page 3-23
3-22.
"Contacting Keysight" on page
"N5290/1A Millimeter-wave
3-41.
3-22.
Keysight N5290/1A Service Guide
"The
3-7.
). Refer
and "PNA
2-7.
) as
and to "PNA