General Product Information; Information In This Chapter; Chapter Two At-A-Glance - Keysight Technologies N5290/1A PNA Series Service Manual

Keysight Technologies N5290/1A
PNA and PNA-X Series 2-Port and 4-Port Microwave Network Analyzer
Systems
Service Guide
2

General Product Information

STOP! If you have a problem with your N5293A or N5295A millimeter-wave
head, you must return it to the factory for repair. Refer to
Keysight" on page
This service guide covers the N5292A millimeter-wave test set controller.
For information on servicing your PNA vector network analyzer. Refer to
the service guide for your PNA here: http://www.keysight.com/find/pna.
This chapter contains service information for a standalone 2-port and 4-port
N5292A Test Set Controllers.
The following procedure verifies the test set without some system components.
(i.e., This procedure does require a PNA with a minimum 10 MHz to 26.5 GHz
frequency range.)
The instructions below generally assume a 4-Port N5292A. If you are using a
2-port N5292A, omit ports 3 and 4.

Information in This Chapter

Chapter Two at-a-Glance

Section Title
N5290/1A System Options,
Accessories, and Upgrades
Available
Required Service Test Equipment
2-7.
Summary of Content
A hyperlink to the System Configuration Guide, which
includes a list of options, accessories, and upgrades
available for the system.
A list of service equipment that is required to perform
system verification, performance tests, adjustments,
and troubleshooting.
2-1
"Contacting
Start Page
page 2-3
page 2-3