Keysight Technologies N5290/1A PNA Series Service Manual page 142

Replaceable Parts
Replaceable Parts Listings
Reference Part Number
Designator
➁
N5292-63010
➂
0515-0365
➃
N5292-60002
➄
➅
➆
0515-0430
➇
N5292-60003
➈
N5242-40014
N5240-63084
10
-- 1400-0249
11
a. Spare blue cable for each port's integrated connector cable bundle (p/o: N5292-60018) is connected to the front panel, but is
connected to an unmarked TSMB connector. This cable is only used, when one of the blue test or reference cables goes bad.
6-14
Qty Description
2 Fail safe sensor PCA. An N5292A-200 test set has two N5292-63010 PCA
(4) sensors and an N5292A-400 uses four PCA sensors. Refer to
page 6-15.
4 Screw-Machine W/Crest-Cup-Con-Washer Pan-HD TORX-T6 M2 x 4mm-LG
SST-300 Passivated (to attach Fail Safe Sensors to integrated connectors
(x1) for each port)
2 Cable, fail safe sensor PCA. An N5292A-200 test set has two N5292-60002
(4) cables and an N5292A-400 uses four cables.
Not used
Not used
2 Screw-Machine W/Crest-Cup-Con-Washer Pan-HD Torx-T10 M3 x 6mm-LG
SST-300 Passivated (To attach to power switch to front panel). Refer to
Figure 6-5 on page 6-15
1 Power switch cable. Refer to
1 Power switch keypad. Refer to
on page 6-16.
1 Power switch board (PCA for Power button keypad). Refer to
page 6-15 and Figure 6-8 on page
4 Tie wraps. Refer to Figure 6-6 on page
Not used
and Figure 6-9 on page 6-17.
Figure 6-8 on page 6-16.
Figure 6-5 on page 6-15
6-16.
6-15.
Keysight N5290/1A Service Guide
Figure 6-6 on
and Figure 6-8
Figure 6-5 on