Keysight Technologies N5290/1A PNA Series Service Manual page 32

General Product Information
Required Service Test Equipment
a
Equipment
Calibration and Verification Tools
1.0 Precision Calibration Kit
ECal module
(300 kHz to 26.5 GHz)
Power supply load ET
LO Cal and RF Eterm ET
WBIF and LFE Eterm ET
Cables
System Cable
Cables (x6)
3.5 mm (m) to 3.5 mm (m)
Cables (x2 or x4) - Front
Panel - (36 inches long)
GPIB cable
Adapters
1.0 mm (f) to 10 mm (f)
(short thru)
SMA (m) to SMA (f) elbow
e
adapters
SMA (m) to SMA (f) thru
f
adapters (x8)
a. Unless specified otherwise, equipment listed is required for all analyzer models.
b. P = Performance tests, A = Adjustments, T = Troubleshooting, R = Repair, V = System verification
c. N5240-60092 is the longer cable that is used on the PNA LO OUT to N5292A test set's LO IN (rear panel).
d. This is a short thru that is not included in the 85059B calibration kit.
e. Use x3 for front panel wideband IF and LFE Eterms.
f. Use x5 as connector savers on the rear panel IF ports (optional). Use x3 for front panel wideband IF and LFE Eterms.
2-4
Critical Specifications
--
Recommended, but not
required.
--
--
--
--
--
--
4 foot
Return Loss: ≥ 14 dB
Return Loss: ≥ 14 dB
Return Loss: ≥ 14 dB
Recommended Alternate Model
Model or Part or Part Number
Number
85059B n/a
N4691D Equivalent or
300 kHz to 26.5 GHz better
ET57265 None
ET57259-1 None
ET57259-2 None
N4011-21002 None
Equivalent or
c
N5240-60092
better
Z5623-K20 Equivalent or
better
10833B Equivalent or
better
None
d
11920-60002
1250-2818 Equivalent or
better
1250-3851 Equivalent or
better
Keysight N5290/1A Service Guide
b
Use
P,A,T,V
V
P,A,T,V
P,A,T,V
P,A,T,V
P,A,T,V
P,A,T,V
P,A,T,V
P,A,T,V
P,A,T
P,A,T,V
P,A,T,V