Keysight Technologies N5290/1A PNA Series Service Manual page 175

Replaceable Parts
Replaceable Parts
Table 6-4 Replaceable Parts
Keysight Part Number
N5292-20016
IMPORTANT!
this cable is 2.4 mm that
connects to the PNA the
other end connects to the
test set. Figure 6-22 on
page 6-44.
N5292-20017
IMPORTANT!
this cable is 2.4 mm that
connects to the PNA the
other end connects to the
test set. Figure 6-22 on
page 6-44.
1818-0118
System Rear Cables:
8121-2970
N4011-21002
N5240-60092
Millimeter System Optional Parts:
N5290A301
N5290A302
Millimeter Heads:
N5293AX03
N5293AX53
N5295AX03
N5295AX53
Interconnect Kit: See also,
N5292-60012 (3.5 mm)
N5292-60013 (2.4 mm to 3.5 mm)
Keysight N5290/1A Service Guide
Description
Cable Assy-RF, 4P Test Port 3/4 to Test Set, SMA-2.4mm
One end of
Semi-rigid cables – part of: N5290/1A Option 202 (Interconnect Kit
N5292-60013) or N5290/1A Option 403 (Interconnect Kit
One end of
N5292-60017). Cable Assy-RF, 2P Test Port 1/2 to Test Set,
SMA-2.4mm.
50 ohm load
Cable Assembly-Coaxial 50-Ohm SMA-Male to SMA-Male 12-in-LG
XT Cable Assembly 25-Way D-Sub
Cable Assy-RF, SMA/SMA 16 in 26.5 GHz
Frequency extender bias tee adapter kit
Frequency extender desktop positioner
N5293A 1 kHz to 110 GHz Millimeter head with 1.2 (4 foot) miter cable.
N5293A 1 kHz to 110 GHz Millimeter head with 1.5 (5 foot) miter cable.
N5295A 1 kHz to 120 GHz Millimeter head with 1.2 (4 foot) miter cable.
N5295A 1 kHz to 120 GHz Millimeter head with 1.5 (5 foot) miter cable.
https://literature.cdn.keysight.com/litweb/pdf/N5292-90002.pdf
N5293A 1 kHz to 110 GHz Millimeter head with 1.2 (4 foot) miter cable.
N5293A 1 kHz to 110 GHz Millimeter head with 1.5 (5 foot) miter cable.
.
6-47