Keysight Technologies N5290/1A PNA Series Service Manual page 82

System Tests and Adjustments
Test Management Environment (TME) Performance Tests (N5290/1 A Millimeter
System Only)
characterized by NPL or NIST (or another NMI). Please order Option H99 to
get electronic data for easy import into the N7800A (avoids manual entry).
The overall resulting N7800A measurement uncertainties then reflects
these lower device uncertainties. The equipment requirements of each
N7800A calibration application are summarized in the specials calibration
matrix which can be found at the Recommended Lab Standards and
Special Cal Options website.
4. The Keysight Option H99 is a special option for the Roseville Service
Center [only] which provides electronic calibration data available as a
*.csv file in TME N7800A format for all power sensors used with the
N7800A TME application. N7800A TME is SSU calibration software used
across Keysight SSU and by many self-maintainers. H99 must be
requested from the Roseville SSU upon re-calibration only of any
previously purchased power sensor and not for new purchases of BID
Power Sensors. This option provides for adding the calibration data to a
CD and may be ordered in addition to any other required or requested Std
Lab Calibration option (must also be ordered in addition to H99).
3-46 Keysight N5290/1A Service Guide