Lo Adjustment For Mm Mode; If Gain Adj For Mm Mode; Source And Receiver Adj; Receiver Characterization - Keysight Technologies N5290/1A PNA Series Service Manual

System Tests and Adjustments
Adjustments
Figure 3-33 Select Desired Adjustment Menu

LO Adjustment for mm Mode

This adjustment is used for the N5292A and for the N5290/1 A system. Refer to
"LO Power Calibration, Adjustment, and Verification" on page

IF Gain Adj for mm Mode

Run test and follow the prompts.

Source and Receiver Adj.

Run test and follow the prompts.

Receiver Characterization

Run test and follow the prompts.

IF Response Adj. for mm Mode

Run test and follow the prompts.
Keysight N5290/1A Service Guide
3-24.
3-49