Table of Contents
Advertisement
Back Panel
10/100/1000
Base-T Twisted
Pair Ports
The GS910/XST series switch has an internal power supply with a single
AC power supply socket on the rear panel. Figure 6 shows the rear panel
of the GS910/10XST switch. The rear panel for the GS910/18XST and
GS910/26XST is as shown in Figure 6.
x
Figure 5. Rear Panel for the GS910/10XST Switch
x
Figure 6. Rear Panel for the GS910/18XST and GS910/26XST Switches
The GS910/10XST switch has eight 10/100/1000Base-TX twisted pair
ports, from port 1 to port 8; the GS910/18XST switch has 16, from port 1 to
port 16; the GS910/26XST switch has 24, from port 1 to port 24.
Connector
All the twisted pair ports feature 8-pin RJ-45 connectors. For the port
pinouts, see "RJ-45 Twisted Pair Port Connectors" on page 81.
Speed
The ports are 10Base-T, 100Base-TX, and 1000Base-T compliant and
capable of 10 Mbps, 100 Mbps, and 1000 Mbps speeds.
The ports are IEEE 802.3u Auto-Negotiation compliant. With
Auto-Negotiation, the switch automatically matches the highest possible
common speed between the switch port and its end-node.
For example, if an end-node is capable of only 10 Mbps, the switch sets
the port connected to the end-node to 10 Mbps.
Chapter 1: Product Description
AC Power Connector
AC Power Connector
15
Advertisement
Table of Contents
